PROJECTS:

Cervecería Modelo del Centro is one of the biggest and most successful international projects of AB-InBev Mexico, Grupo Modelo. It has been managed by Lehui International, it encompasses 92 large sized fermentation tanks (1500hl, 9600hl CCTs) and bright beer tanks (3000hl BBTs). Most of the diameters of the equipment excess of 9 meters and hence, this project required that the tank sections were shipped from China as break-bulk cargo and were completed on-site and installed by the Mexican subsidiary of Lehui Mexico. The installed capacity of this pant in its phase I and II is 12 million hectoliter and the footprint of the plant is designed for a potential capacity of 24 million hectoliter per year.

ABInbev México.

Phase 1(2018)

  • 28*7272hl/9600hl CCT, Diameter 9000mm
  • 8*1212/1500hl CCT, Diameter 5500mm
  • 10*3000/3300hl BBT, Diameter 6000mm

Phase 2(2019)

  • 28*7272hl/9600hl CCT, Diameter 9000mm
  • 8*1212/1500hl CCT, Diameter 5500mm
  • 10*3000/3300hl BBT, Diameter 6000mm

Phase 1 & Phase 2 transport in pieces and assembled on site

Chinese Supervisor and Local workers

East Timor Project

 HEINEKEN The brewery built on a 5,5 ha. site, located in the country of Timor East, 20 km East of the city of Dili. The site is near the north coast of the country. The site is approx. 500 m off the shore. Available area is 250 X 220 m.

The brewery shall be produce beer, CSD (Carbonated Soft Drinks) and water, in cans, PET bottles, kegs and jars. Phase1 annual beer capacity designed is

12500kl/year, Phase2 will extend to 30000kl/year.

Lehui develop these Project from the construction site (civil work) until the packing line.

UB Shajahanpur in India (2018-2019)

The Brewery was built near the national high speed way in Shajahanpur, Rajasthan, 110km southwest of New Delhi. It is an expansion project in an old brewery. Lehui supplied one new 300HL brewhouse beside the old one.